Advice from here

[nirjhor]

Hello again, For our first machine we need advice out of this forum,
Soon we r planning to show a machine with all attractive features which can impress with 3d works (engrave & cut ) at fair.
our main material should be solid wood, next preferred material could be thin sheet of steel or tiles (optional).
Recoil could be added, We need a spindle with good performance, servo (preferred) but ballscrew also ok. x axis bed (Width) size min. 3'(three feet).
our main product is wooden door.
ATC is a good option also.

Thats all, we don't need any Chinese or Asia made machines, Used machines with good offer could be considerable. More & more details are warmly appreciated.
Oh forgot to put our budget, thts real challenge may be but least we can afford USD 16,000 only. So rest of your part. I only could pull trigger

[book]

[Mick Martin]

Hello again, For our first machine we need advice out of this forum,
Soon we r planning to show a machine with all attractive features which can impress with 3d works (engrave & cut ) at fair.
our main material should be solid wood, next preferred material could be thin sheet of steel or tiles (optional).
Recoil could be added, We need a spindle with good performance, servo (preferred) but ballscrew also ok. x axis bed (Width) size min. 3'(three feet).
our main product is wooden door.
ATC is a good option also.

Thats all, we don't need any Chinese or Asia made machines, Used machines with good offer could be considerable. More & more details are warmly appreciated.
Oh forgot to put our budget, thts real challenge may be but least we can afford USD 16,000 only. So rest of your part. I only could pull trigger

[book]

Have you checked out the CAMaster website http://www.camaster.com/Our%20Routers.htm a stinger II or a Cobra would fit your needs.

Stinger II 36x48

* Cut Area - 36" X 48" X 5"
* Over All Dimensions - 45" X 66"
* Router Weight - 700 lbs (Approx)
* Shipping Weight - 1000 lbs (Approx)

Stinger II 48x48

* Cut Area - 48" X 48" X 5"
* Over All Dimensions - 58" X 66"
* Router Weight - 800 lbs (Approx)
* Shipping Weight - 1100 lbs (Approx)

Stinger II 48x96

* Cut Area - 48" X 96" X 5"
* Over All Dimensions - 58" X 115"
* Router Weight - 1200 lbs (Approx)
* Shipping Weight - 1500 lbs (Approx)



Standard Features

* Rapid Speeds - X & Y 500 ipm - Z 400 ipm
* Welded Steel Table with Powder Coat Finish
* Rack & Pinion on XY & Z
* Nema 23 Step Motors with Softstep Drive System
* MDF Table Top
* Working Table Height - 34.75"
* Limit Switches on All Axies
* Dust Boot
* E-Stop (On Front of Machine)
* Porter Cable 2.25 HP Router Variable-speed *
* Cut 2D Design Software *
* Windows Based Controller (Includes - PC, Keyboard, Mouse, & Flat Panel Monitor) Pre Loaded with WinCNC Control Software and Tested*
* Power Requirements: - 2 Circuits 115V Single Phase with 20A Service (One for PC & CNC, One for Router)
* Warranty: - 1 Year Parts & Labor

Cobra specs

* Rapid Speed - 1800 ipm This determines the travel speed when the cutter is out of the material and moving to the next cut position.
* Cut Speed - 600 ipm This determines the rate of travel you can achieve during your cuts**
* 3.0 kw (4 HP) HSD High Frequency Spindle* 3 Phase 230V Power (Ask us how this spindle can run on single phase power)
* Resolution - .0005"
* Repeatability - +/- .002"
* Cut Force - In excess of 200 lbs. This is the force at the bit at normal operating cut speed.
* Z Height - 8" *
* Z Travel - 11" *
* Code - Reads Industry Standard G-Code
* Cobra Series Power Requirements
*

* This Option can be Upgraded from the factory

Most of the CAMaster machines come with servos, The Cobra comes standard with a Spindle the Stinger II comes with a Porter Cable router but can be upgraded to a spindle.

Send an email to contactus@camaster.com