WinCNC inch tap

[jrj5x5]

What did I learn today?
When outputting g code on step 7 in cut3d, Do not use the wincnc inch tap setting
Why?
From day one I have always had issues centering the file on the material using cut3d.
Today I decided to track down the problem.

My solution turns out to be use the shop saber inch tap g code with cut 3d.

This problem does not affect Aspire files with the wincnc inch tap extension.

Jim J.

[james mcgrew]

james the shop sabre post proccessor is a wincnc controller the same as we use in camasters, we always have used the ss pp

jim

[james mcgrew]

here is the camaster pp for cut 3d

this is for the single spindle or router machines not the tool changer or x3