No announcement yet.

Cobra SR-510 Pulling Tools Vertically Out of Tool Holder

  • Filter
  • Time
  • Show
Clear All
new posts
  • Cobra SR-510 Pulling Tools Vertically Out of Tool Holder


    I was using my machine today, and after initializing and warming up the machine was not pulling the tools out of their holders the way were supposed to. Meaning instead of grabbing them, moving in the x direction to take them out and then taking them up, it was just grabbing them and picking them straight up. It broke the T10 holder by doing so. I am wondering if this is a well known issue with the machine. And if so how is it fixed? If not how would I go about trouble shooting the problem?

    Thanks for any help,

    Zack D'Souza
  • #2

    Go to CAMaster website and then support enter a support ticket, most do not know this is the fastest way to get help.. mine did this once some years ago but i cannot remember what solved it as it never didi it again
    James McGrew
    CAMaster ATC 508
    The principle of Measure twice cut once has not been replaced by a CNC

    Camera 1 ATC Closeup !

    fixed 4-27-2020