Announcement

Collapse
No announcement yet.

Camaster Cobra Y1 servo not working

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Camaster Cobra Y1 servo not working


    My dual bed camaster Cobra got hooked up and the Y1 (left) gantry servo has holding power but wont move with Y2 for initialization.. checked the harnesses and drivers. All looks good. Anyone else have a similar issue?
  • #2

    Check control cables to insure they are seated correctly, No Bent pins etc.
    James McGrew
    CAMaster ATC 508
    The principle of Measure twice cut once has not been replaced by a CNC

    www.mcgrewwoodwork.com

    https://www.facebook.com/pg/Mcgrew-W...=page_internal

    Camera 1 ATC Closeup !
    https://video.nest.com/live/esNTrZ

    fixed 4-27-2020

    Comment

    • #3

      The left Y servo makes the limit switch first then the right makes the limit switch then both move back a little. This is squaring up the gantry in the y axis.
      Stinger II SR44 with servos
      Recoil Prep
      3KW spindle
      7 Watt Laser
      Pro Option Pack
      Hand Held Keypad
      T-Slot Table with Hurricane Vacuum.
      Aspire 10.5
      WinCnc

      Comment

      Working...
      X