Announcement

Collapse
No announcement yet.

Having axis errors

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Having axis errors


    Code is 32020200
    This group split-axis command data did not agree. The component axis must be moved to identical locations separately before using multi-axis commands..

    I'm new to the program side of CNC and used to old school Shodas. Any help could be appreciated.
  • #2

    Current machine is a Cobra Elite CR-510ATC

    Comment

    • #3

      Check the power wires going into the servos to make sure they are tight. Acknowledge/Clear the error and see if the machine will move. If that doesn't work, shut down the machine and computer and restart it to see if that helps.
      Wes
      Elite CNC Routing & Woodworks on Facebook
      Steel 5X10 Panther
      5Hp ATC spindle with 8 tool carousel
      WinCNC
      VcarvePro 9.5
      15Hp FPZ vacuum, phenolic plenum

      Comment

      • #4

        That seems to have kicked it in the butt, thanks!

        Comment

        Working...
        X