Announcement

Collapse
No announcement yet.

Post Processing / Machine Files MasterCAM and/or FeatureCAM

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Post Processing / Machine Files MasterCAM and/or FeatureCAM


    Hi guys !
    We just bought a used Stinger 1 and were wondering if someone has the files so we can program our pieces with the software we know. (MasterCAM and FeatureCAM)

    Thanks !
  • #2

    Check with MC and FC what you need are Post Processor for wincnc, someone here may have this but generally the software companys provide them
    James McGrew
    CAMaster ATC 508
    The principle of Measure twice cut once has not been replaced by a CNC

    www.mcgrewwoodwork.com

    https://www.facebook.com/pg/Mcgrew-W...=page_internal

    Camera 1 ATC Closeup !
    https://video.nest.com/live/esNTrZ

    fixed 4-27-2020

    Comment

    Working...
    X