Announcement

Collapse
No announcement yet.

Simple searches do not return any hits (at least for me)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Simple searches do not return any hits (at least for me)


    So far not having fun in the new environment - I need to replace my 2012 Windows 7 PC furnished by Camaster so I need to know what type of slots are needed for the Wincnc boards so I first searched for "computer replacement" and that returned nothing so I just searched for "computer" alone and that returned nothing too.

    Is there a "sticky" somewhere that introduces the new software? All the stickies are older than ten years.

    Am I the only one having this problem?

    Thanks,

    Terry
    Terry Williams
    Cobra 510 with Recoil
  • #2

    Here are the requirements from the WinCNC website. They also sell preconfigured machines. If you don't want to mess with putting one together yourself you could just buy one from them.

    WinCNC 3.0:
    • CPU: An Intel Celeron CPU is the minimum requirement, with an Intel Pentium CPU recommended. For AMD systems a socket FM2+ or newer CPU is recommended.
    • RAM: 2GB of RAM is the minimum requirement, with 4GB of RAM recommended.
    • Hard Drive: Very little hard drive space is necessary. A standard installation requires less than 100MB.
    • OS: Supports Windows 7, 8, and 10. Both the 32 and 64 bit versions of Windows are supported.
    • Case: A MicroATX Mini or larger case is required. Hardware dimensions should be verified for a MiniITX case.
    • Intel Motherboard Chipset: All 1155, 1150, and 1151 chipsets are supported.
    • AMD Motherboard Chipset: A45, A55, A58, A68H, A75, A85X, A88X, A55E, A77E, and A78 (recommended).
    • Motherboard Expansion: One PCI expansion slot is required for PCI7200 OR one PCIe expansion slot is required for PCIe7200. Hardware dimensions are slightly larger than a single slot. Additional room below the PCI/PCIe slot is required in some cases.
    4'x8' Stinger IV w/ 4.2 hp spindle and 4 tool ATC
    Mister system
    Phenolic Vac table
    Hurricane Vac
    Vcarve Pro 10



    Catholic school IT director, wannabe woodworker, Krav Maga instructor, and CNC enthusiast

    Comment

    • #3

      The search tool doesn't seem to work for me either.
      Stinger II SR44 with servos
      Recoil Prep
      3KW spindle
      7 Watt Laser
      Pro Option Pack
      Hand Held Keypad
      T-Slot Table with Vacuum Prep.
      Aspire 10.5
      WinCnc

      Comment

      • #4

        The forum updraging is not complete yet, Once done all will be restored
        James McGrew
        CAMaster ATC 508
        The principle of Measure twice cut once has not been replaced by a CNC

        www.mcgrewwoodwork.com

        https://www.facebook.com/pg/Mcgrew-W...=page_internal

        Camera 1 ATC Closeup !
        https://video.nest.com/live/esNTrZ

        fixed 4-27-2020

        Comment

        • #5

          This should be fixed now
          James McGrew
          CAMaster ATC 508
          The principle of Measure twice cut once has not been replaced by a CNC

          www.mcgrewwoodwork.com

          https://www.facebook.com/pg/Mcgrew-W...=page_internal

          Camera 1 ATC Closeup !
          https://video.nest.com/live/esNTrZ

          fixed 4-27-2020

          Comment

          Working...
          X