Tweet
Any other X3 folks trash can the camaster dust boot? It didn’t work well so I made three dust boots and a split ducting system to suck all three. I’ll try to post pics later but it solved the dust problems for the most part. Basically three Kent dust boots. Similar design
-
Stinger III w/ X3 and Recoil
Aspire -
I bought my system used and the one that came with mine was broken. I measured and cut my own, but soon found its limitations. I would definitely be interested in seeing your setup.
George Grant
Stonefly Woodworking
Bingham, Maine
Stinger II SR-44
Recoil
X3
VCarve 11.5
Facebook
https://www.facebook.com/Stoneflywoodworking
Stoneflywoodworking@gmail.com -
Would LOVE to see that.Texas Hardwood Products
CAMaster Stinger III X3
www.texashardwoodproducts.comComment
-
Did you ever get photos of the setup you designed? I'm using the factory boot and it's okay but not great.CAMaster Stinger III X3
WinCNC
Vectric VCarve Pro
Vectric VCarve PhotoComment
-
It works 5x better than the generic boot from camaster. Tolerances were tight but I have ever had an issue with it at all. All made on the camaster. Had to make a custom bracket for top to setup blast gates so I can direct all vacuum to a particular head if wanting to. Sorry it took so long for photos.You do not have permission to view this gallery.
This gallery has 2 photos.Last edited by Eb0la11; 10-06-2023, 07:45 PM.Stinger III w/ X3 and Recoil
AspireComment
Comment