Announcement

Collapse
No announcement yet.

Post Processor for CPP

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • sirmellor
    replied
    Thanks James!

    Leave a comment:


  • james mcgrew
    replied
    This CPP post Processor has worked for me for years, Remember it is for an ATC
    You do not have permission to view this gallery.
    This gallery has 1 photos.

    Leave a comment:


  • sirmellor
    replied
    Hi James, that would be great, thanks.
    Ed, I started to play around with importing into vectric. You are certainly right when it comes to the cost of material and availability!

    Leave a comment:


  • james mcgrew
    replied
    I have a pp for CCP and will post asap. I am not at.macbine

    Leave a comment:


  • Ed Hazel
    replied
    Are you cutting direct rom CPP or did you import to Vectric?

    I only use CPP from time to time for personal stuff. I found it easier for me to import into aspire to check and tweak as needed, which I would recommend for your first cuts. (especially with the cost of sheet goods) If so then use your normal PP. I know the guys who use it all the time cut direct from CPP successfully.

    Leave a comment:


  • sirmellor
    started a topic Post Processor for CPP

    Post Processor for CPP

    Hi, I'm getting ready to cut out my first cabinet with CPP and want to make sure I'm using the right post processor. I have a 4x8 Panther with atc.

    Thanks, Richard
Working...
X