Announcement

Collapse
No announcement yet.

UHaul trailer for pickup

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jim Becker
    replied
    Originally posted by oozeBot View Post
    I forgot to mention the other issue with UHaul’s trailer - the tailgate cannot be removed. Luckily Camaster had fork extensions but it would have been nice to know it couldn’t be removed ahead of time..
    That's not surprising...UHaul would undoubtedly have a lot of trailers with missing or damaged tailgates. That said, they do have the 6x12 without a tailgate available, too, although maybe not in all locations.

    'Glad you got your new yellow monster and hope you enjoy putting it to work!

    Leave a comment:


  • gwdwoodworking
    replied
    Thanks for sharing

    I am right behind you I hope - scheduled for the middle of June pick up but they have told me it will be the end of July now. I am picking mine up as well with a flatbed trailer. So I should have plenty of room - still not sure how to get the S3 off the trailer yet, so this gave me some good ideas. Good luck with getting it set up.

    Leave a comment:


  • oozeBot
    replied
    I forgot to mention the other issue with UHaul’s trailer - the tailgate cannot be removed. Luckily Camaster had fork extensions but it would have been nice to know it couldn’t be removed ahead of time..

    Leave a comment:


  • oozeBot
    started a topic UHaul trailer for pickup

    UHaul trailer for pickup

    We just picked up our Stinger 3 today and I thought I post this for others while it was fresh on my mind. Since we are only a few hundred miles away, we rented a UHaul pickup and 6'x12' trailer. We knew it would be a tight fit and that it had a narrow tailgate, but the legs would fit through the tailgate.. What we didn't know is the way the tailgate is made is just high enough to block the steppers (in our case servos) from easily rolling through it. Plus the side of the trailer are so high that there was only about 1/2" free on either side of the servos. Yeah, *really* tight fit.

    Luckily, Camaster had extensions for their forklift and were able pick it up and over to load it.. but we still had to get it off. Once we got back to our shop, we jacked it up and put the heavy duty 3/4"-10 casters on and began unloading.

    Here's the reason (tip) for this thread for anyone else who decides to rent UHaul.. probably find a different option. Lol. But if you do go this route, I'm here to tell you it can be done safely by doing the following. We unloaded it to the point we couldn't go any further because the gantry was going to hit the tailgate. Then we jacked the end up that was still on the trailer high enough where the servos would clear it and then manually pushed the gantry down the bed until the servos cleared the tailgate. It was smooth sailing after that!

    Another tip is to let Camaster know you plan to install casters so they can have a chance to make sure the threads are clean. We didn't do that.

    Here are a few pics from today.

    Loading from above:
    pic1.jpg

    REALLY tight fit!
    pic2.jpg

    All loaded up. You can see the tailgate in this pic.
    pic3.jpg
    Last edited by oozeBot; 07-09-2021, 11:04 AM.
Working...
X