Announcement

Collapse
No announcement yet.

laser engraving

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • #16

    Originally posted by tmhooper View Post
    -Each wood is different, but to get a nice dark burn you have to run it around 100IPM or less at 100% laser power. You can go a bit faster if you are running a dithered photo, but I don't have a bunch of experience with that yet.
    For comparison I have a laser whose maker claims a top speed of 170 inches per SECOND and a Cobra. Assuming the laser head is attached to the spindle somewhere I can't imagine the motors necessary to start and stop the overall mass of my Cobra head running at anywhere near the speed of the laser. Even at max travel speed laser engraving with a Cobra would be slow and laborious process- and it would take the router out of production for that amount of time as well. Happy to share the maker of the laser if that's allowed.
    Jeff Potts

    Cobra 508 ATC
    Laser
    WinCNC
    VCarve Pro

    Comment

    • #17

      Originally posted by Luke Bennett View Post
      Hey Guys,

      Sorry I was out of town last week. Kevin spoke correctly on what he was saying. We do offer a 7w laser as of now.

      We have a Stinger 3.
      Can we purchase your laser, and adapt it to our existing Stinger 3?

      Thanks...
      Mark
      Mark

      Comment

      Working...
      X