Announcement

Collapse
No announcement yet.

Video of Surfacing Spoilboard .005"

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Video of Surfacing Spoilboard .005"


    Surfacing the Spoilboard down .005"

    aprox 61" x 100" MDF surface Cobra 508 x3

    600 ipm

    Vacuum hold down on with dust collection working too.

    Surfacing SB
    Last edited by KickIt; 01-15-2016, 03:30 PM. Reason: Forgot to say machine type
    Kevin Stoops
    Cobra's 508 ATC
    Recoil, vacuum hold down.
    Aspire 9, Photo w/Cut-3d, CPP
    30W Fiber Laser
    TDS Control Keypads - Inventor of the TDS/KRS Keypads
    www.krscorporation.com for keypad support home
    YouTube Videos
  • #2

    Where on earth can you find mdf that big?

    Comment

    • #3

      There is a lumber yard in this area that was named Cedar Creek (they changed their name). They carry all kinds of lumber. My spoilboard started out as a 60”x120x1.125”. A lot of CNC’s use this as the “base” for the table top.
      Kevin Stoops
      Cobra's 508 ATC
      Recoil, vacuum hold down.
      Aspire 9, Photo w/Cut-3d, CPP
      30W Fiber Laser
      TDS Control Keypads - Inventor of the TDS/KRS Keypads
      www.krscorporation.com for keypad support home
      YouTube Videos

      Comment

      • #4

        You can find 5x10 or 5x12 MDF at most lumber wholesalers. Not an unusual size at all. You might have to strike up a relationship with a local cabinet shop to have them order a piece if you need it.
        Steve Godding
        D&S Artistic Woodworking LLC

        Comment

        • #5

          Originally posted by Mr. Robot View Post
          Where on earth can you find mdf that big?

          Hood Distribution has been my goto and the pricing isn't bad at all.
          I bought 4x12 sheets recently for $33 a piece, but it was only 1/2" for a project of mine.

          They are based out of the Southeast.
          https://www.hooddistribution.com/locations/
          Camaster Stinger II SR-34
          1.7kW spindle, FTC, Laser Cross Hair, Musclechuck

          Comment

          • #6

            Originally posted by sgodding View Post
            You can find 5x10 or 5x12 MDF at most lumber wholesalers. Not an unusual size at all. You might have to strike up a relationship with a local cabinet shop to have them order a piece if you need it.
            You will also need a few friends bribed with a few adult beverages to help lift it. :)
            ---
            Jim Becker

            SR-44 (2018), 1.7kw spindle, Performance Premium, USB, Keypad, T-Slot table (y-axis configuration), WinCNC, VCarve Pro upgraded to Aspire

            Non CNC stuff...

            SCM/Minimax
            Festool "a good collection"
            Stubby - lathe
            Oneida Cyclone
            more...

            Retired from full time work in the telecom industry 9/2017
            Occasional commission work for others, but mostly for me...furniture/tack trunks/signage/guitars
            Located Bucks County PA

            Comment

            • #7

              try shuffling around 1 3/4 5x8 sheets!
              Joe Alcathie
              Stinger II 4x4
              Wincnc
              Aspire 3.5
              Halainc1@gmail.com

              Comment

              • #8

                Fork Lifts , Sissor lifts and feeders No money to be made with a Mans back pain anymore
                James McGrew
                CAMaster ATC 508
                The principle of Measure twice cut once has not been replaced by a CNC

                www.mcgrewwoodwork.com

                https://www.facebook.com/pg/Mcgrew-W...=page_internal

                Camera 1 ATC Closeup !
                https://video.nest.com/live/esNTrZ

                fixed 4-27-2020

                Comment

                Working...
                X