Announcement

Collapse
No announcement yet.

Avatar

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Avatar


    I been trying to add an Avatar and for some reason it will not let me. I know there is a box you check if you want on or not and when I click it nothing happen. I have taken a Jpeg and did change it to meet the required size. When I go into edit Avatar there is no way I can add it. So what the heck am I doing wrong?
    Thanks, Thane

    Cobra 512 ATC
    Recoil, Misting System, indexing pins, Laser,Phenolic Top, 25hp FPZ Vacuum System w/air dump
    Aspire 4.5, Cut 3D
    http://TimberWolfMillworks.com
  • #2

    Having your own avatar is not an option on this forum. IMHO, I think it should be.
    Bruce Page
    Retired Hobbyist
    2013 Stinger 1 SR23
    FTC
    Laser Pointer
    HSD 1.7kw Spindle
    KRS USB Keypad
    Mick Martin Table
    Aspire 10.512, WinCNC
    Chips-a-flyin
    brucep128@gmail.com

    Comment

    • #3

      Ok you must be Special or a Moderator to get one then cause some do have one.
      They should just take that option out on the control panel then.
      Thanks, Thane

      Cobra 512 ATC
      Recoil, Misting System, indexing pins, Laser,Phenolic Top, 25hp FPZ Vacuum System w/air dump
      Aspire 4.5, Cut 3D
      http://TimberWolfMillworks.com

      Comment

      • #4

        Originally posted by TimberWolfMillworks View Post
        Ok you must be Special or a Moderator to get one then cause some do have one.
        They should just take that option out on the control panel then.
        Huh? An avatar is typically a small picture identifying the user. Some of the Mods have one but I don't see anyone else, including me that has one. What are you talking about?
        Bruce Page
        Retired Hobbyist
        2013 Stinger 1 SR23
        FTC
        Laser Pointer
        HSD 1.7kw Spindle
        KRS USB Keypad
        Mick Martin Table
        Aspire 10.512, WinCNC
        Chips-a-flyin
        brucep128@gmail.com

        Comment

        • #5

          Don't think he meant you personally Bruce, I think he meant more like "one must be special".

          Is kinda weird to have no avatar option, I don't like forums with huge flashing gifs for avatars & sig lines but it would be nice to be able to add a little pic. I agree they should either be allowed or the option done away with.
          Doug

          Stinger 1

          Comment

          • #6

            Originally posted by Xray View Post
            Don't think he meant you personally Bruce, I think he meant more like "one must be special".

            Is kinda weird to have no avatar option, I don't like forums with huge flashing gifs for avatars & sig lines but it would be nice to be able to add a little pic. I agree they should either be allowed or the option done away with.
            You're probably right Doug. Sorry Thane.

            I don't like the flashing gifs either. An Admin can easily remove that option in the vBulletin software. I do think putting a picture with a face is a good thing.
            Bruce Page
            Retired Hobbyist
            2013 Stinger 1 SR23
            FTC
            Laser Pointer
            HSD 1.7kw Spindle
            KRS USB Keypad
            Mick Martin Table
            Aspire 10.512, WinCNC
            Chips-a-flyin
            brucep128@gmail.com

            Comment

            • #7

              Originally posted by Bruce Page View Post
              You're probably right Doug. Sorry Thane.

              I don't like the flashing gifs either. An Admin can easily remove that option in the vBulletin software. I do think putting a picture with a face is a good thing.
              Have you seen some of these faces?

              Some thing are better left alone!
              Larry aka Speedy

              SR-44, 1.7KW SPINDLE with AIR ASSIST,
              NEMA 34 MOTOR, DUAL RACK & PINION GANTRY DRIVES,
              GANTRY LIFT, FTC, LASER.
              AUTOCAD , ASPIRE, CUT 3D, PHOTO CARVE


              Ind. Craftmaster 612, ( 6' x 12' )

              Springfield CNC Routing LLC
              SPRINGFIELD, MISSOURI

              Comment

              • #8

                Originally posted by Speedy View Post
                Have you seen some of these faces?

                Some thing are better left alone!
                LOL, in your case you should put up Katie's pic!
                Bruce Page
                Retired Hobbyist
                2013 Stinger 1 SR23
                FTC
                Laser Pointer
                HSD 1.7kw Spindle
                KRS USB Keypad
                Mick Martin Table
                Aspire 10.512, WinCNC
                Chips-a-flyin
                brucep128@gmail.com

                Comment

                • #9

                  Originally posted by TimberWolfMillworks View Post
                  I been trying to add an Avatar and for some reason it will not let me. I know there is a box you check if you want on or not and when I click it nothing happen. I have taken a Jpeg and did change it to meet the required size. When I go into edit Avatar there is no way I can add it. So what the heck am I doing wrong?
                  I see your dog photo when I look at your public profile. Is that what this is about?
                  Charlie L
                  Stinger II, 48 by 48, 1.7 kW Spindle, FTC + Laser + Recoil + Vacuum, July 2012
                  WinCNC 2.5.03, Aspire, PhotoVCarve, Windows 7 Pro SP1

                  Comment

                  • #10

                    Bruce;;;; I did not mean your special but Hey for the sake of argument You are a special person,LOL......

                    The Avatar is like a picture right beside your screen name like on Jim's and Mick's....Screen Name. The dog pic is a profile picture..... Not a huge issue, just I was in the Edit Avatar in the User CP and what ever I tried it would not let me which I thought was messed up cause it is there.... Only reason why is I was in the office and I came out to this...And thought it be a good Avatar pic is all.... My Timber Wolf/German Shepherd (Thunder) who is only 10 months old...
                    Attached Files
                    Last edited by TimberWolfMillworks; 01-31-2015, 04:39 AM. Reason: added text
                    Thanks, Thane

                    Cobra 512 ATC
                    Recoil, Misting System, indexing pins, Laser,Phenolic Top, 25hp FPZ Vacuum System w/air dump
                    Aspire 4.5, Cut 3D
                    http://TimberWolfMillworks.com

                    Comment

                    • #11

                      I guess we can take Jims silence as meaning "no avatars !" for whatever reason. I think the subject has been broached before I forgot what the response was
                      Doug

                      Stinger 1

                      Comment

                      • #12

                        Person can post pictures of themselves on their user page
                        Larry aka Speedy

                        SR-44, 1.7KW SPINDLE with AIR ASSIST,
                        NEMA 34 MOTOR, DUAL RACK & PINION GANTRY DRIVES,
                        GANTRY LIFT, FTC, LASER.
                        AUTOCAD , ASPIRE, CUT 3D, PHOTO CARVE


                        Ind. Craftmaster 612, ( 6' x 12' )

                        Springfield CNC Routing LLC
                        SPRINGFIELD, MISSOURI

                        Comment

                        • #13

                          Originally posted by Speedy View Post
                          Person can post pictures of themselves on their user page
                          Yes, I undestand that part and we can have our own picture album ect, I was just curious why we could not have a Avatar like some do. Maybe in the next life I will be special to have one...... It is just the option is there but no can do....
                          Thanks, Thane

                          Cobra 512 ATC
                          Recoil, Misting System, indexing pins, Laser,Phenolic Top, 25hp FPZ Vacuum System w/air dump
                          Aspire 4.5, Cut 3D
                          http://TimberWolfMillworks.com

                          Comment

                          Working...
                          X