View Single Post
  #3  
Old 03-30-2020, 09:30 AM
Ed Hazel Ed Hazel is offline
CAMaster owner
 
Join Date: Jan 2015
Location: Woodland Mi
Posts: 87
Default

You can drill them with a 1/16 drill bit, and 1/16 collet. Need to experiment with RPM spindles have less power at lower RPMS probably a minimum recommended rpm for your spindle. 1/16 bits are cheap if you burn up a few. If it not to thick I would just drill it in one shot.

That being said, could you jump up to .125? A .125 hole is 4X the area of a 1/16. You have a cnc why not get creative instead of a bunch of holes?
__________________
Ed Hazel

508 Cobra ATC 15 Tools
Reply With Quote