View Single Post
  #8  
Old 02-06-2020, 12:12 PM
guitarwes guitarwes is offline
CAMaster Owner
 
Join Date: Jul 2018
Location: SE Ga
Posts: 479
Default

What material do you plan to use for this? Don't be so concerned about the conventional/climb cut with Vcarving. Use a good sharp bit and go at it with the correct feeds/speeds.
__________________
Wes
Elite CNC Routing & Woodworks on Facebook
Steel 5X10 Panther
5Hp ATC spindle with 8 tool carousel
WinCNC
VcarvePro 9.5
15Hp FPZ vacuum, phenolic plenum
Reply With Quote