View Single Post
  #1  
Old 05-24-2019, 10:56 AM
noboost4you noboost4you is offline
CAMhead Friend
 
Join Date: Oct 2009
Location: Cleveland, OH
Posts: 53
Question Converting MC-2840 from router to plasma

Hello,

I’ve owned and operated the CAMaster MC-2840 since 2009 and it’s been the greatest workhorse. I would now like to see if it is possible to convert the machine from running a Porter Cable router to a Hypertherm 45 XP plasma cutting system.

Here are my machine’s specs:
• Power supply is a MeanWell S-150-24 outputting 24V
• Stepper motors are 23H276-28-4B (x- and y-axis) and 23H300H-05B (z-axis)
• Rockcliff Stepper Driver 4X (which has been discontinued)
• Running Mach3 on a Windows XP Home Edition, Service Pack 3 PC. Intel Pentium 4, 2.66GHz and 1 Gb RAM.

Would these current components be compatible with the 45 XP? How would I go about introducing the plasma cutter? Any help or assistance anyone can provide would be appreciated!

Regards,
Bryan
__________________
CAMaster MC-2840 - Simply Awesome, but showing its age. (born 2009)
Reply With Quote