CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > The Water Cooler > The Water Cooler

Reply
 
Thread Tools Display Modes
  #1  
Old 06-18-2019, 05:06 AM
FrankB FrankB is offline
CAMhead Friend
 
Join Date: Jul 2016
Posts: 12
Default SR44 Dimensions w/recoil

Am ready to purchase the StingerII 4x4 And am having trouble getting an answer on machine dimensions.
On description page the foot print is given as 77"x79"
On the layout drawing it is given as 67.5"x 78"

I want the recoil ready pkg. which states that it adds 11" of width.
To which given measurement is the 11" added to? Or is the dimension of 77"x 79" with the recoil ?

Am limited in space and if the 11" inches is added to the 77 x 79 it would be too much .
Reply With Quote
  #2  
Old 06-18-2019, 08:42 AM
mike.davison mike.davison is offline
CAMaster Owner
 
Join Date: Jul 2015
Location: Bolton, Massachusetts
Posts: 525
Default

A Stinger II with Recoil is 77"x79". Don't add another 11".

You can place the back very near a wall and the left side within about 12" of a wall. You'll need people space on the other 2 sides.
__________________
Mike Davison www.DavisonWoodworks.com
Stinger II with Recoil, GCNC Sidewinder Lathe, Aspire, Sketchup
Reply With Quote
  #3  
Old 06-18-2019, 09:00 AM
Charlie_L Charlie_L is offline
Stinger II Owner
 
Join Date: Mar 2012
Location: Wisconsin
Posts: 1,500
Default

Here is a similar post you might want to read.
https://camheads.org/showthread.php?...ger+dimensions
__________________
Charlie L
Stinger II, 48 by 48, 1.7 kW Spindle, FTC + Laser + Recoil + Vacuum, July 2012
WinCNC 2.5.03, Aspire 9, PhotoVCarve, Windows 7 Pro SP1
Reply With Quote
  #4  
Old 06-19-2019, 03:55 PM
The real JP The real JP is offline
CAMaster Owner
 
Join Date: Mar 2017
Location: Oklahoma
Posts: 585
Default

The recoil adds width to the machine x axis on the right side. If you are standing at the control box looking down the y axis.

You can unbolt the whole thing, taking the lathe part completely off, but you cannot do anything about the extra gantry width.
__________________
Jpscustomshop@gmail.com

Industrial electrician by day, Cabinet and furniture maker by evening and weekend. Cnc newb.

June 2017 Stinger 3 SR48
3kw spindle, FTC, Laser, Recoil, Hurricane
V Carve, Mozaik
Reply With Quote
  #5  
Old 06-19-2019, 04:41 PM
Jim Becker Jim Becker is offline
CAMaster Owner
 
Join Date: Jan 2018
Location: SE PA
Posts: 1,270
Default

The other thing to remember about the SR44 (or SR48) with the extended gantry for recoil (with the recoil or just the prep) is that that extra width of the gantry also has to fit though the door you intend to bring your machine into your shop through. I would not have been able to accommodate that as my shop's double out-swing doors only have a 72" opening. Fortunately, I didn't buy that option since I felt I would never use it. :) If you plan on doing furniture work, be sure you do opt for the 2" extra gantry height, however. I missed that and it would have made my life easier.
__________________
---
Jim Becker

SR-44 (2018), 1.7kw spindle, Performance Premium, USB, Keypad, T-Slot table (y-axis configuration), WinCNC, VCarve Pro upgraded to Aspire

Non CNC stuff...

SCM/Minimax - slider/JP/BS
Festool "a good collection"
Stubby - lathe
Oneida Cyclone
more...

Retired from full time work in the telecom industry 9/2017
Commission work for equestrian tack storage and other custom furniture and cabinetry
Located Bucks County PA
http://bvww.us
bvww.etsy.com
Reply With Quote
  #6  
Old 06-19-2019, 04:56 PM
Charlie_L Charlie_L is offline
Stinger II Owner
 
Join Date: Mar 2012
Location: Wisconsin
Posts: 1,500
Default

A great example showing how small the door can be.
https://camheads.org/showthread.php?t=8073
__________________
Charlie L
Stinger II, 48 by 48, 1.7 kW Spindle, FTC + Laser + Recoil + Vacuum, July 2012
WinCNC 2.5.03, Aspire 9, PhotoVCarve, Windows 7 Pro SP1
Reply With Quote
  #7  
Old 06-19-2019, 05:27 PM
Michael Mezalick's Avatar
Michael Mezalick Michael Mezalick is offline
CAMaster Owner, (MOD, KOTR)
 
Join Date: Nov 2009
Location: Philadelphia, PA
Posts: 2,681
Default

Quote:
Originally Posted by Charlie_L View Post
A great example showing how small the door can be.
https://camheads.org/showthread.php?t=8073

LOL Charlie,,,,Yep, it was me ...Good times...

Michael
__________________
Michael Mezalick
Cobra, WINCNC

3-D Modeling
https://carveddetails.com

mm@mezalick.com
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 07:55 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.