CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > The Water Cooler > The CAMhead Locker Room! > Jim Becker

Reply
 
Thread Tools Display Modes
  #1  
Old 05-04-2019, 09:33 AM
Jim Becker Jim Becker is offline
CAMaster Owner
 
Join Date: Jan 2018
Location: SE PA
Posts: 1,088
Default Bunny Gate

The trial of “Bunny Gate” has concluded and the jury of one said “guilty” of all counts of impeding traffic. 😂 Pine panel, glued up and then cut on the CNC. Embedded steel around the perimeter on the back to keep it strong and flat. That said, probably going to need some wire mesh for this to work long term. I was hoping not, but Dotti seemingly may be able to squeeze down more than I expected. 😉

__________________
---
Jim Becker

SR-44 (2018), 1.7kw spindle, Performance Premium, USB, Keypad, T-Slot table (y-axis configuration), WinCNC, VCarve Pro upgraded to Aspire

Non CNC stuff...

SCM/Minimax - slider/JP/BS
Festool "a good collection"
Stubby - lathe
Oneida Cyclone
more...

Retired from full time work in the telecom industry 9/2017
Commission work for equestrian tack storage and other custom furniture and cabinetry
Located Bucks County PA
http://bvww.us
bvww.etsy.com
Reply With Quote
  #2  
Old 05-04-2019, 09:34 AM
T.R.MacMunn T.R.MacMunn is offline
CAMaster Owner
 
Join Date: Jan 2010
Location: Mtn.Grove Ontario
Posts: 2,269
Default

That's pretty cool, Jim
__________________
TR
www.trmacsigns.com
CAMaster MC4836 named Jemima
Aspire 3.5
Mach3
CoreldrawX3
Reply With Quote
  #3  
Old 05-04-2019, 09:35 AM
Jim Becker Jim Becker is offline
CAMaster Owner
 
Join Date: Jan 2018
Location: SE PA
Posts: 1,088
Default

Quote:
Originally Posted by T.R.MacMunn View Post
That's pretty cool, Jim
Dotti doesn't think so...
__________________
---
Jim Becker

SR-44 (2018), 1.7kw spindle, Performance Premium, USB, Keypad, T-Slot table (y-axis configuration), WinCNC, VCarve Pro upgraded to Aspire

Non CNC stuff...

SCM/Minimax - slider/JP/BS
Festool "a good collection"
Stubby - lathe
Oneida Cyclone
more...

Retired from full time work in the telecom industry 9/2017
Commission work for equestrian tack storage and other custom furniture and cabinetry
Located Bucks County PA
http://bvww.us
bvww.etsy.com
Reply With Quote
  #4  
Old 05-04-2019, 10:19 AM
Ballistix Ballistix is offline
Banned
 
Join Date: Mar 2017
Posts: 55
Default

That's nice.

I made a Kitty gate to keep the pups from getting to the kitty food.
But, it has an opening for the kitties to pass through.
Reply With Quote
  #5  
Old 05-04-2019, 10:29 AM
Jim Becker Jim Becker is offline
CAMaster Owner
 
Join Date: Jan 2018
Location: SE PA
Posts: 1,088
Default

Quote:
Originally Posted by Ballistix View Post

I made a Kitty gate to keep the pups from getting to the kitty food.
But, it has an opening for the kitties to pass through.
Really great idea there!!!
__________________
---
Jim Becker

SR-44 (2018), 1.7kw spindle, Performance Premium, USB, Keypad, T-Slot table (y-axis configuration), WinCNC, VCarve Pro upgraded to Aspire

Non CNC stuff...

SCM/Minimax - slider/JP/BS
Festool "a good collection"
Stubby - lathe
Oneida Cyclone
more...

Retired from full time work in the telecom industry 9/2017
Commission work for equestrian tack storage and other custom furniture and cabinetry
Located Bucks County PA
http://bvww.us
bvww.etsy.com
Reply With Quote
  #6  
Old 05-04-2019, 10:47 AM
Ballistix Ballistix is offline
Banned
 
Join Date: Mar 2017
Posts: 55
Default

Quote:
Originally Posted by Jim Becker View Post
Really great idea there!!!
I don't want to hijack your thread, but here is a pic right off the machine. I too painted it white.



Reply With Quote
  #7  
Old 05-04-2019, 10:48 AM
Jim Becker Jim Becker is offline
CAMaster Owner
 
Join Date: Jan 2018
Location: SE PA
Posts: 1,088
Default

No worries about any kind of "hijack"...sharing is what it is all about! That's a beautiful and functional piece of art!
__________________
---
Jim Becker

SR-44 (2018), 1.7kw spindle, Performance Premium, USB, Keypad, T-Slot table (y-axis configuration), WinCNC, VCarve Pro upgraded to Aspire

Non CNC stuff...

SCM/Minimax - slider/JP/BS
Festool "a good collection"
Stubby - lathe
Oneida Cyclone
more...

Retired from full time work in the telecom industry 9/2017
Commission work for equestrian tack storage and other custom furniture and cabinetry
Located Bucks County PA
http://bvww.us
bvww.etsy.com
Reply With Quote
  #8  
Old 05-04-2019, 03:50 PM
Ballistix Ballistix is offline
Banned
 
Join Date: Mar 2017
Posts: 55
Default

Quote:
Originally Posted by Jim Becker View Post
No worries about any kind of "hijack"...sharing is what it is all about! That's a beautiful and functional piece of art!
My significant other wanted me to ask if you see the cats.
The first thing she asked when I showed it to her was, "what does a jack-o-lantern have to do with cats"?
She then pointed out that the center looks like a pumpkin face. Now I see it...
Reply With Quote
  #9  
Old 05-04-2019, 05:56 PM
Jim Becker Jim Becker is offline
CAMaster Owner
 
Join Date: Jan 2018
Location: SE PA
Posts: 1,088
Default

Yes, the cats were immediately visible to me.
__________________
---
Jim Becker

SR-44 (2018), 1.7kw spindle, Performance Premium, USB, Keypad, T-Slot table (y-axis configuration), WinCNC, VCarve Pro upgraded to Aspire

Non CNC stuff...

SCM/Minimax - slider/JP/BS
Festool "a good collection"
Stubby - lathe
Oneida Cyclone
more...

Retired from full time work in the telecom industry 9/2017
Commission work for equestrian tack storage and other custom furniture and cabinetry
Located Bucks County PA
http://bvww.us
bvww.etsy.com
Reply With Quote
  #10  
Old 05-05-2019, 04:42 PM
drummerjg drummerjg is offline
CAMaster Owner
 
Join Date: Dec 2016
Location: Addison, PA
Posts: 838
Default

Same here...cats plainly obvious. In fact I had to hunt for the pumpkin. Amazing how different folks "see" different things, huh?

By the way....Nice gates Jim & Ballistix.
__________________
Joe Garber
Retired Hobbyist
Stinger 1 SR24
FTC
Laser Pointer
HSD 1.7kw Spindle
Indexing Lathe
WinCNC, Aspire 9.5, PhotoCarve
Storm Vacuum
drummerjg@icloud.com


How to count to 10 in Windows:
1,2,3,95,NT,2000,XP,Vista,7,8,10
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:41 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.