CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > Tips & Techniques > General Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 03-06-2020, 12:39 PM
MK-Tek Holsters MK-Tek Holsters is offline
CAMaster Owner
 
Join Date: Aug 2017
Location: Northeast
Posts: 8
Default T Slot or Not?

Debating the importance of putting T Slots in for our New Stinger. About to attach a spoil board to the Black factory board and paused to think how useful will the T Slots be for the future? We will be making Holster cut outs on the machine. So this means Pallets holding the plastic shells in place. I guess the T Slots would be useful when clamp thicker pieces of HDPE in to cut new molds in.
How many folks use T Slots in the work day?
Thanks
Todd May
MK-Tek Holsters
New Stinger Owner
Reply With Quote
  #2  
Old 03-06-2020, 01:07 PM
Charlie_L Charlie_L is offline
Stinger II Owner
 
Join Date: Mar 2012
Location: Wisconsin
Posts: 1,574
Default

Wouldn’t be happy without them.
__________________
Charlie L
Stinger II, 48 by 48, 1.7 kW Spindle, FTC + Laser + Recoil + Vacuum, July 2012
WinCNC 2.5.03, Aspire 9, PhotoVCarve, Windows 7 Pro SP1
Reply With Quote
  #3  
Old 03-06-2020, 03:00 PM
Erik Land Erik Land is offline
CAMaster Owner
 
Join Date: May 2014
Location: Oregon
Posts: 47
Default

I put my own T-track in and love them for holding all my odd projects. In my opinion more is better. I also ran mine cross wYs on my SR24. Not to many projects I don’t use them. You may also want to put in some indexing pin holes for quick setup.
__________________
Erik Land
Dorena Oregon
Cnccutter@gmail.com


Stinger I SR24 11/27/17
Performance package Pro:
2" Gantry Lift
FTC Fast Tool Change
Laser Cross Hair
Counter Balance
Tee Track Table
Kent Dust Shoe
WinCNC
Aspire 9.5
Rhino
Reply With Quote
  #4  
Old 03-06-2020, 05:50 PM
rcrawford rcrawford is offline
Cobra Owner
 
Join Date: Dec 2011
Location: Alberta
Posts: 2,370
Default

Mostly use my T-slots to hold down jigs. While not necessary, they certainly make my life easier the few times I need to use them. For the little extra work and cost, I'd put them in.
__________________
Russell Crawford
Cobra 408 ATC with recoil
Alberta, Canada
www.cherryleaf-rustle.com
Reply With Quote
  #5  
Old 03-06-2020, 09:14 PM
Jim Becker Jim Becker is offline
CAMaster Owner
 
Join Date: Jan 2018
Location: SE PA
Posts: 1,466
Default

I use my tee slots frequently, despite using screws even more frequently. I got the option from the factory but had them run them on the Y axis (front to back) rather than side to side. That was a better arrangement for my needs.
__________________
---
Jim Becker

SR-44 (2018), 1.7kw spindle, Performance Premium, USB, Keypad, T-Slot table (y-axis configuration), WinCNC, VCarve Pro upgraded to Aspire

Non CNC stuff...

SCM/Minimax - slider/JP/BS
Festool "a good collection"
Stubby - lathe
Oneida Cyclone
more...

Retired from full time work in the telecom industry 9/2017
Commission work for equestrian tack storage and other custom furniture and cabinetry
Located Bucks County PA
http://bvww.us
bvww.etsy.com
Reply With Quote
  #6  
Old 03-07-2020, 12:04 PM
minimum99 minimum99 is offline
CAMhead Friend
 
Join Date: Dec 2019
Posts: 45
Default

I had the same question as you and decided not to use T Tracks.
Instead, I installed EZ-Lok inserts at 3" interval. Made some clamps with maple that can handle the 3" spacing to handle all sizes of material. Also made some Cam Clamps with 1/4 bolts to push the material horizontally to stay clear of the material surface for application such as surfacing a board to desired thickness. I am happy with this setup. If you like I can send you the drawings for the clamps.
__________________
Vincent Doan
Website: www.amazoncanvas.com
Hardware: Stinger I, 1K Spindle, Lathe
Software: Adobe Illustrator, ImagePaint, VCarve Pro, Sketchup
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:16 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.