![]() |
#1
|
|||
|
|||
![]()
Anyone know why this vectric 3d stl file has the lines on the anchor.
|
#2
|
||||
|
||||
![]()
What bit are you using,, looks like a rough path or a balnose to big, simulate it with a 1/16th or 1/8th ballnose ??
__________________
James McGrew CAMaster ATC 508 The principle of Measure twice cut once has not been replaced by a CNC www.mcgrewwoodwork.com https://www.facebook.com/pg/Mcgrew-W...=page_internal Camera 1 ATC Closeup ! https://video.nest.com/live/esNTrZ |
#3
|
|||
|
|||
![]()
It's a .125 ballnose and the project is 36inches. It is the actual file...
|
#4
|
||||
|
||||
![]()
Something is not right for sure.
__________________
James McGrew CAMaster ATC 508 The principle of Measure twice cut once has not been replaced by a CNC www.mcgrewwoodwork.com https://www.facebook.com/pg/Mcgrew-W...=page_internal Camera 1 ATC Closeup ! https://video.nest.com/live/esNTrZ |
#5
|
||||
|
||||
![]()
it does not look toolpath as the direction changes from the flutes to the globe ??
__________________
James McGrew CAMaster ATC 508 The principle of Measure twice cut once has not been replaced by a CNC www.mcgrewwoodwork.com https://www.facebook.com/pg/Mcgrew-W...=page_internal Camera 1 ATC Closeup ! https://video.nest.com/live/esNTrZ |
#6
|
||||
|
||||
![]()
Usmc ega vectric
__________________
James McGrew CAMaster ATC 508 The principle of Measure twice cut once has not been replaced by a CNC www.mcgrewwoodwork.com https://www.facebook.com/pg/Mcgrew-W...=page_internal Camera 1 ATC Closeup ! https://video.nest.com/live/esNTrZ |
#7
|
||||
|
||||
![]()
Your model does not look like Vectrics EGA,? any chance it came from somewhere else ?
__________________
James McGrew CAMaster ATC 508 The principle of Measure twice cut once has not been replaced by a CNC www.mcgrewwoodwork.com https://www.facebook.com/pg/Mcgrew-W...=page_internal Camera 1 ATC Closeup ! https://video.nest.com/live/esNTrZ |
#8
|
||||
|
||||
![]()
send me an email mcgrew 636 @ msn .com
__________________
James McGrew CAMaster ATC 508 The principle of Measure twice cut once has not been replaced by a CNC www.mcgrewwoodwork.com https://www.facebook.com/pg/Mcgrew-W...=page_internal Camera 1 ATC Closeup ! https://video.nest.com/live/esNTrZ |
#9
|
|||
|
|||
![]()
For anyone that was reading this, I went back and looked again and the vile was actually a vectorclip3d file. And it is what I showed it here... Had the lines and looks kind of flat. I must of got the file a long time ago... Not impressed
Anthony |
#10
|
|||
|
|||
![]()
Thanks for the heads up, Anthony. I had looked at their files and considered buying some.
__________________
Joe Garber Retired Hobbyist Stinger 1 SR24 FTC Laser Pointer HSD 1.7kw Spindle Indexing Lathe WinCNC, Aspire 9.5, PhotoCarve Storm Vacuum drummerjg@icloud.com How to count to 10 in Windows: 1,2,3,95,NT,2000,XP,Vista,7,8,10 |
![]() |
Thread Tools | |
Display Modes | |
|
|