![]() |
#11
|
|||
|
|||
![]()
I’ve used it to accurately set a tool after measuring with my FTC. You have to run single tool toolpaths though. You can measure with that 2” dial indicator and either set a temporary Z with g92z2 Or use m37z2. https://www.camheads.org/showthread....37z2#post83615
__________________
Gary 2018 Stinger II SR-44, 1.7kW Spindle, Performance Premium, Recoil, Gantry Lift, Cyclone Fusion 360 Aspire |
![]() |
Thread Tools | |
Display Modes | |
|
|