|
|
#1
Yesterday, 12:00 AM
|
|||
|
|||
Stinger 1 E-stop
Just bought a 1 year old stinger in really good condition. Got to start it up and it wont move. I get a reset e-stop c1 alarm when I try to do anything. I've checked the e-stop. It's out and functional. Everything in the cabinet is green. Checked all the voltages. Any advice?
|
|
#2
Yesterday, 11:04 AM
|
|||
|
|||
|
Close and open the estop circuit a few times to make sure it is all the way out. Double check that the serial cables are completely seated and hooked up to the correct input on the computer. Double check wiring all over to make sure nothing has shifted or come loose.
__________________
4'x8' Stinger IV w/ 4.2 hp spindle and 4 tool ATC Mister system Phenolic Vac table Hurricane Vac Vcarve Pro 10 Catholic school IT director, wannabe woodworker, Krav Maga instructor, and CNC enthusiast
|
|
#5
Yesterday, 09:01 PM
|
|||
|
|||
|
If it was me, I had plugged the cable into the wrong port on the computer.
__________________
Charlie L Stinger II, 48 by 48, 1.7 kW Spindle, FTC + Laser + Recoil + Vacuum, July 2012 WinCNC 2.5.03, Aspire 9, PhotoVCarve, Windows 7 Pro SP1
|
|
#6
Today, 10:16 AM
|
|||
|
|||
|
Have you tried reseating the PCI cards inside the PC?? Sometimes they jar loose in transit...just a thought.
__________________
Joe Garber Retired Hobbyist Stinger 1 SR24 FTC Laser Pointer HSD 1.7kw Spindle Indexing Lathe WinCNC, Aspire 9.5, PhotoCarve Storm Vacuum drummerjg@icloud.com How to count to 10 in Windows: 1,2,3,95,NT,2000,XP,Vista,7,8,10
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
