#1




Error multiple commands
Good afternoon,
I have been trying to run a file out of fusion 360 as well as inventor. Everytime I try to run the file through win cnc I get "Error multiple commands" or file not found. I am using the wincnc_noatc postprocessor. I have been searching all over trying to get this taken care of but can't figure out what I need to do to get a post processor in inventor or fusion to work with win cnc. I could not attach the whole file so I copied and pasted some of the code below. Thanks a ton in advance [1001] [T1 D=0.25 CR=0.  ZMIN=2.582  ball end mill] G90 G20 G53 [Adaptive1] S7330 M3 G0 X0.0312 Y2.0739 Z0.6 Z0.2 Z0.1 G3 X0.0312 Y2.075 Z0.0966 I0.0312 J0.0006 F55 X0.0312 Y2.0739 Z0.0931 I0.0312 J0.0006 X0.0312 Y2.075 Z0.0897 I0.0312 J0.0006 X0.0312 Y2.0739 Z0.0863 I0.0312 J0.0006 X0.0312 Y2.075 Z0.0829 I0.0312 J0.0006 X0.0312 Y2.0739 Z0.0794 I0.0312 J0.0006 X0.0312 Y2.075 Z0.076 I0.0312 J0.0006 X0.0312 Y2.0739 Z0.0726 I0.0312 J0.0006 X0.0312 Y2.075 Z0.0691 I0.0312 J0.0006 X0.0312 Y2.0739 Z0.0657 I0.0312 J0.0006 X0.0312 Y2.075 Z0.0623 I0.0312 J0.0006 X0.0312 Y2.0739 Z0.0589 I0.0312 J0.0006 X0.0312 Y2.075 Z0.0554 I0.0312 J0.0006 X0.0312 Y2.0739 Z0.052 I0.0312 J0.0006 X0.0312 Y2.075 Z0.0486 I0.0312 J0.0006 X0.0312 Y2.0739 Z0.0451 I0.0312 J0.0006 X0.0312 Y2.075 Z0.0417 I0.0312 J0.0006 X0.0312 Y2.0739 Z0.0383 I0.0312 J0.0006 X0.0312 Y2.075 Z0.0349 I0.0312 J0.0006 X0.0312 Y2.0739 Z0.0314 I0.0312 J0.0006 X0.0312 Y2.075 Z0.028 I0.0312 J0.0006 X0.0312 Y2.0739 Z0.0246 I0.0312 J0.0006 X0.0312 Y2.075 Z0.0211 I0.0312 J0.0006 X0.0312 Y2.0739 Z0.0177 I0.0312 J0.0006 X0.0312 Y2.075 Z0.0143 I0.0312 J0.0006 X0.0312 Y2.0739 Z0.0109 I0.0312 J0.0006 X0.0312 Y2.075 Z0.0074 I0.0312 J0.0006 X0.0312 Y2.0739 Z0.004 I0.0312 J0.0006 X0.0312 Y2.075 Z0.0006 I0.0312 J0.0006 
#2




If you want a correct answer, attach the file that produced the error. The only issue I see with the included text is that there is a "G53" call with no axis parameters.
__________________
Gary Campbell CNC Technology and Training The Ultimate Woodworking Machine GCnC411@gmail.com https://www.youtube.com/user/Islaww1/videos "There are 10 kinds of people in the world. Those that understand binary logic, and those who don't" 
Thread Tools  
Display Modes  

