CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > CAMaster Machines > Elite Series

Thread Tools Display Modes
Old 10-03-2018, 09:29 AM
Tristan Tristan is offline
CAMaster Owner
Join Date: Jul 2013
Location: KZN, South Africa
Posts: 144
Send a message via Skype™ to Tristan

Unfortunately Spraying/Varnishing is a long process. The spraying itself can be quick, but the drying needs to happen properly, and that takes time. Then the varnish needs to be a high gloss varnish, then its just a few coats with de-nibbing between coats. In terms of the solar setup, that is purely to save on electricity costs, it can also be heated with electrical heaters. The tunnel only speeds up the drying time. We also use a catalyst to speed up the drying time, but each coat still takes an hour to dry.
Tristan Brammer

CAMaster Cobra CR-609 ATC
2018 CAMaster Elite CR-609 ATC

Enroute 4 and Aspire v8 Design Software
AutoCAD, Autosketch, Sketchup

Razor CNC
Aspire v8

"Sawdust means Work in Progress"
Reply With Quote
Old 10-05-2018, 07:53 PM
Rlee1972 Rlee1972 is offline
CAMaster Owner
Join Date: Mar 2017
Posts: 534

Thank you for sharing so much info Tristan. Hope life and work are going well for you over there!
Ron Lee
Blackshear, Ga

2018 Cobra Elite 5 x 10
20 Tool Holder
25HP Regen Vac

2017 Panther 408
6 Tool Rotary Carousel
Recoil Lathe
Aspire 9.5

Be humble.
Be kind.
Be grateful.
Life is too short and prone to quickly change to live otherwise.
Reply With Quote
Old 01-11-2019, 09:56 AM
Harbits Harbits is offline
CAMhead Guest
Join Date: Apr 2017
Posts: 1
Default the cobra elite CR-408 ATC

How can i increase or reduce the speed of the machine while running a program using the wincnc controller
Reply With Quote
Old 01-11-2019, 11:04 AM
Gary Campbell's Avatar
Gary Campbell Gary Campbell is offline
CNC Consultants and Trainers
Join Date: Dec 2012
Location: Marquette, MI USA
Posts: 3,042

You can use the feedrate adjustment slider (next to the axis DRO's) or the [INS] key to increase feeds and the [DEL] key to decrease them. Pressing [CTRL] + [INS] or [DEL] sets back to 100% of programmed feedrate
Gary Campbell
CNC Technology and Training
The Ultimate Woodworking Machine

"There are 10 kinds of people in the world. Those that understand binary logic, and those who don't"
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 01:10 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.